Wednesday, June 12, 2013

Ugly Duckling Box

 
So I get almost all my wood at the BORG. The overall quality is low, but the thing is you can dig to your hearts content. With a little patience I can find almost perfectly clear stock, even quartersawn, but I can't count on it, so I tend to buy it when I find it and save it.
 
This particular story is different though. I didn't dig up this board, rather no one else wanted it. It was almost the last board left in the 1x12 stack when I got there, and as soon as I saw it, I had to get it. It looked so lonely! So it's been waiting in the shop for almost a year, and a few days ago I decided to build a box, or maybe I should say another box because I do seem to make a lot of them. Anyway, it was time for the ugly duckling board to shine! (Jazz hands!)
 
This box is a cross between my pencil box and the box I made to hold flutes (which apparently would also be cool for holding vinyl... although I don't know about that). If you want to see how I made this box, just check out those two posts.
 
Here is the finished box before oiling:
 

And here is why we oil wood - KA-POW!:


The other end:


And a few detail shots:






Man, I wish there had been two of those boards!


22 comments:

  1. The detail shots are beautiful!!!

    I love that you made it a cross between the pencil box and the flute box.

    The wood is beautiful- the whole thing is beautiful! I must congratulate you!!!

    I really do wish that I had ninja woodworking skills. Oh the things I could make... someday. Right now I have to work on being a ninja at other, more pressing things - (life).

    Ha ha! Anyway, I wish you the best with your beautiful box:)

    P.s. I especially like the " jazz hands" part!

    ~ Georgie N. :)

    ReplyDelete
    Replies
    1. Georgie - Thanks! Your woodworking skills will rise to "ninja" status with enough practice, which I am sure you will have time for after mastering "life" - wait, that might take a while - maybe as you master life - no worries.

      Delete
    2. Ha ha! well thank you:) But still...


      By the way, I replied to your last reply to me (huh) at the bottom of your Mystery Tool 2 and if you could just read over that whenever you have a moment that would be wonderful:) I just need to know that your okay with me doing this...

      Thanks!

      Georgie N. :)

      Delete
  2. What prep, if any, do you have to do with board after a year?
    I'm curious as to what kind of seasonal wood movement problems you have in your shop.

    ReplyDelete
    Replies
    1. Ralph - No prep - just removed the milling marks with a smoothing plane. In general, I don't worry too much about movement - I just try to use techniques that account for it. In this box the grain of the sides is all parallel - no cross grain. I usually put the bottom in as a floating panel with no glue (or glue in the center only) but in this one I just used nails which tend to be forgiving enough for the movement. Our humidity range here in Alaska is pretty huge - very, very low in winter and very high in summer (well a wet one anyway). Thanks for commenting.

      Delete
  3. Great grain! You're correct,wish there had been more of the boards in the store.

    ReplyDelete
    Replies
    1. Steve - I know! Just lucky to get that one - went in for something else and took my usual stroll past the wood "just in case". Glad I did - and glad no one else thought it was a nice board.

      Delete
  4. I occasionally see boards with similar figure at the local borgs, here, as well.

    They always remind me of Freddy Krueger's face...

    Nice job, Dan. ;)

    ReplyDelete
    Replies
    1. Ethan - Thanks! I'm curious what makes that happen...the grain, not Freddy's face...

      Delete
  5. Beautiful Box. I love the grain.
    looks like you got the best board
    in the stack. Nice job.
    Randy A.

    ReplyDelete
  6. The wood is great, what type of wood do you think it is?
    The opening statement is:
    So I get almost all my wood at the BORG. I have not experience the acronym BORG. What does it mean?

    ReplyDelete
    Replies
    1. Rev John - I think it is pine, and the grain is in reaction to some environmental factor.

      As for the BORG, well for me it is a Star Trek reference. The BORG are the evil, all consuming, "resistance is futile", alien collective that fly around in their huge cube, or box, spaceship and assimilate everyone into drones. It works perfectly for Home Depot and Lowe's, well maybe almost perfectly, they are not really evil, but they have been the demise of almost all small hardware stores...

      Some others have used it as an acronym: Big Orange Retail Giant - or something like that.

      Delete
  7. A few years ago, I got a board just like that. I made my first dovetailed stepping stool with that.

    I believe this to be "beetle-kill pine". At least, that is what I was told on the forums.

    PhilM

    ReplyDelete
    Replies
    1. Phil - Thanks! I was thinking something along those lines, especially since there was some tunneling and even a dead larva. Cool!

      Delete
  8. What a great find! That board probably got tossed aside fifty times before you picked it out. Great project for displaying its awesome patterns.

    ReplyDelete
    Replies
    1. Thanks John - I know, I can't help but feel the board is much happier being a box than being used for some other mundane purpose.

      Delete
  9. Fantastic looking wood, one thing i really struggle with is sourcing good quality wood, nothing but poor quality pine up north.

    ReplyDelete
    Replies
    1. Where are you? I tend to be more north than most...

      Delete
  10. I think this is what makes DIY woodworking projects so special is the fact you can do anything you want with it - and only call it "done" when you are satisfied. Loved the close-up shot - looked great!

    ReplyDelete

Comment Moderation has been turned on - too much spam! Bummer.

I will get an email notification and will approve any appropriate comments ASAP.