Monday, October 15, 2012

Tambour Door Experiment


The last of my tool panel up-grades will be the chisel panel. In an effort to save little fingers, but not take up more space, it will actually be a shallow cabinet with a tambour door. I've never made one of these before, and I thought it might be wise to experiment a bit.

Here's a shot of the bench after messing about for a little while:


One piece of the tambour (do those parts have a name?) is lurking under the left holdfast. The tracks were made with compass, knife, gouge and router plane. The first was sized for 1x8 stock, but I decided that would stick out too far from the wall, so I tried a 1x6 size. Seems like it will work fine, unless I want those chisel handles angled out, in which case it'll have to be deeper. Hmm. Decisions, decisions...

1 comment:

Comment Moderation has been turned on - too much spam! Bummer.

I will get an email notification and will approve any appropriate comments ASAP.